Page 127 - Demo

5Data Sheets are Available on our Website by Selecting the SKUTo Order Call +1 (813) 938-6025 or Email sales@mbs-standoffs.com / Live Chat Available! / 1-3 Days Ground Shipping within the 48 Contiguous United States127Securely Snap the letters into place using slight pressure.4 Attach Body ends in correct positions.3 Place template and drill appropriately.2 Place the letter against the template and use pressure to mark placement of pilot holes.1 Using the proper adhesive glue the Head support on the back of the letters. Allow for appropriate cure time before mounting letter.The directions below are general installation recommendations. The weight of each fastener depends on the conditions of use. To avoid unnecessary tension it is advised to avoid over tightening of the body support.4Screw Mounted241 321 31. Surface2. Body with screw3. Letter4. Head with adhesive1. Surface2. Body with screw3. Letter4. Head with screwAlways use stainless steel screws. Tighten the screws through the fastener, then loosen a quarter of a turn. The fasteners must be used exclusively for letters. Use one fastener per 4''. Snap fasteners can be properly secured by using our Quick Snap adhesive for all letters made from acrylic or expanded PVC, or, by using our 2 component adhesive for letters out of aluminum, brass, stainless or multi layer aluminum enamel. Technical InformationPanel MountsQuick Snap StandoffsInstallation 5 Easy Steps