Page 110 - Demo

1101. Mark the wall 3/16'' above and below your desired location of the panel edges.2. Pre-drill 1/4'' holes in your surface, then insert nylon anchors into the holes and tap them flush.3. Drive oval head screws into anchor to mount lower clips. Slide in panel and install upper clips.4. Remove the adhesive backing from discs and place one into the recess on the face of each clip.Anchor Shims Clip Screw DiscProduct Panel ClipDiscVinyl ShimsScrew and AnchorUnique FeaturesIndoor & Outdoor UseArea Of UseSignageWayfinderDisplayAdvertisingAdditionalDetailsDesigned for flat material signsInstructionsScrew Cap CoversAluminum Panel Clip