Display holder (Holds Panel up to 3/16'' Thick)

Product 1

Display holder (Holds Panel up to 3/16'' Thick)

SKU: 150.006
Unit Price$5.01
Quantity Price Each (USD)
1-99 $5.01
100-501 $4.76
500+ $4.51
1000+ Contact Us
 

Display holder (Holds Panel up to 3/16'' Thick)

SKU: 150.006
Display holder (Holds Panel up to 3/16'' Thick)
Description:
Our Stainless Steel display holders are perfect for all your indoor applications. The elegant finishes that we carry will give your display a unique look that will make it stand out like no other! Thanks to the easy installation process you can have an exhibit displayed anywhere you would like in no time! If you look below you will notice technical descriptions about this particular display holder.

Display holder (Holds Panel up to 3/16'' Thick)

SKU: 150.006
Sku 150.006
Finish Satin Brushed
Inside/Outside Inside Use Only
Material Stainless Steel
Diameter 1/2''
Distance From Wall 1/2''
Cable Diameter 1/16''
Length 7/8''
Rated Strength 55 lbs (25 Kg) per Steel Cable (When Properly Installed)
Application On Cable
Thickness Material Accepted Between (0'' and 1/5'')
Maximum Thick. Material 1/5''
Installation

The installation process is very easy!
After you have installed your ceiling mounts and have your cable suspended, just loosen the set screw on your hanging fork, thread the cable into the top of the hanging fork and re-tighten the set screw.
Loosen the lower set screw, insert your material, and re-tighten the set screw.
All that's left to do is take a step back and admire your gorgeous signage.

Installation Hardware None Needed
Tools Required M4 Hex Key

Display holder (Holds Panel up to 3/16'' Thick)

SKU: 150.006

Display holder (Holds Panel up to 3/16'' Thick)

SKU: 150.006