Set of 2, 3/8’’ Diameter Rod Projecting Mount, Stainless Steel Satin Brushed Finish, 24'' Long w/ 3 Holes Mounting Plate, to be installed with screws (Included) or double sided tape (not included). Hold up to 5/16'' material thickness.

Set of 2, 3/8’’ Diameter Rod Projecting Mount, Stainless Steel Satin Brushed Finish, 24'' Long w/ 3 Holes Mounting Plate, to be installed with screws (Included) or double sided tape (not included). Hold up to 5/16'' material thickness.

SKU: RPSL24S

Unit Price$40.37

Quantity	Price Each (USD)
1-99	$40.37
100-501	$38.35
500+	$36.33
1000+	Contact Us

Select Length:

20''

24''

36''

Select Finish:

Clear Anodized

Matte Black

SKU: RPSL24S

Set of 2, 3/8’’ Diameter Rod Projecting Mount, Stainless Steel Satin Brushed Finish, 24'' Long w/ 3 Holes Mounting Plate, to be installed with screws (Included) or double sided tape (not included). Hold up to 5/16'' material thickness.

Description:

This rod projecting mount is sold in a set of two (2), including 2 rods, 2 mounting plates and 4 panel grippers, accepting 1/8'' to 5/16'' thick material. It can be installed vertically or horizontally to fit your installation needs.

SKU: RPSL24S

Sku	RPSL24S
Finish	Matte Black
Inside/Outside	Inside Use Only
Material	Aluminum
Diameter	3/8''
Distance From Wall	24''
Length	24''

Thickness Material Accepted	Between (1/8'' and 5/16'')
Maximum Thick. Material	5/16''

Installation

Begin by inserting the male threads of the rod into the mounting plates. Slide 2 of the adjustable gripping forks on each of the rod, laying everything flat to have the set screws facing up and the left rod forks towards the right and the right rod forks towards the left. Place your acrylic in the center and decide where you would like the forks to be in respect to the acrylic and the rods. Once finalized go ahead and tighten all the set screws down. Pick up your whole complete sign and mount wherever you desire

SKU: RPSL24S