5/16-18 Threaded Caps Diameter: 2'', Height: 5/8'', Clear Anodized Aluminum [Required Material Hole Size: 3/8'']

SKU: CAP20058A

Select Your Preferences

Shape:

Diameter:

Thread:

locking:

Finish:

Unit Price$7.94

Quantity	Price Each (USD)
1-99	$7.94
100-499	$7.54
500+	$7.15
1000+	Contact Us

5/16-18 Threaded Caps Diameter: 2'', Height: 5/8'', Clear Anodized Aluminum [Required Material Hole Size: 3/8'']

SKU: CAP20058A

5/16-18 Threaded Caps Diameter: 2'', Height: 5/8'', Clear Anodized Aluminum [Required Material Hole Size: 3/8'']

SKU: CAP20058A

Sku	CAP20058A
Inside/Outside	Inside Or Outside Use
Material	Aluminum
Diameter	2''
Cap Height	5/8''
Solid/Hollow	Solid
Head Shape	Flat
Shape	Cylinder
Washer	Not Included
Thread Type	Imperial

Thickness Material Accepted	Between (0'' and Depends on Stud Length)
Thread	5/16-18
Maximum Thick. Material	Depends on Stud Length

Installation

The installation process for this line is quite simple.
First, mark on your surface the area for your holes.
Next you will want to drill a hole (according to your anchor type) and then insert your anchor.
Now, take your combination screw and insert that into the anchor.
After that, take your barrel and thread it onto your thread portion of your combination screw.
Now you will want to insert your stud about halfway into your barrel.
Place your material over the stud, then screw on your cap and you are done!
Step back and admire your work!

Load Capacity Per Standoff

18 lbs / 8 Kg

Installation Hardware	Anchor for concrete or drywall and 5/16-18 Studs, #8 Combination Screws
Tools Required	Hand Drill, HEXBIT1/8, ALLEN5/32, ALLEN1/8

5/16-18 Threaded Caps Diameter: 2'', Height: 5/8'', Clear Anodized Aluminum [Required Material Hole Size: 3/8'']

SKU: CAP20058A

5/16-18 Threaded Caps Diameter: 2'', Height: 5/8'', Clear Anodized Aluminum [Required Material Hole Size: 3/8'']

SKU: CAP20058A

5/16-18 Threaded Caps Diameter: 2'', Height: 5/8'', Clear Anodized Aluminum [Required Material Hole Size: 3/8'']

SKU: CAP20058A