Set of 2, 3/8'' Diameter Vertical Rod Mount, Aluminum Clear Anodized Finish, 20'' Long w/ Adjustable Clamp to Accomodate 3/4'' to 1-1/2'' Counters. Hold up to 5/16'' material thickness

Product 1

Set of 2, 3/8'' Diameter Vertical Rod Mount, Aluminum Clear Anodized Finish, 20'' Long w/ Adjustable Clamp to Accomodate 3/4'' to 1-1/2'' Counters. Hold up to 5/16'' material thickness

SKU: DCAD075-20A
Unit Price$44.66
Quantity Price Each (USD)
1-99 $44.66
100-501 $42.43
500+ $40.19
1000+ Contact Us
 

Set of 2, 3/8'' Diameter Vertical Rod Mount, Aluminum Clear Anodized Finish, 20'' Long w/ Adjustable Clamp to Accomodate 3/4'' to 1-1/2'' Counters. Hold up to 5/16'' material thickness

SKU: DCAD075-20A
Set of 2, 3/8'' Diameter Vertical Rod Mount, Aluminum Clear Anodized Finish, 20'' Long w/ Adjustable Clamp to Accomodate 3/4'' to 1-1/2'' Counters. Hold up to 5/16'' material thickness
Description:
Set of 2, 3/8'' Diameter Rod Vertical Mount, Aluminum Clear Anodized Finish, 20'' Long w/ Clamp to handle 3/4'' to 1-1/2''. Hold up to 5/16'' material thickness. For an application where holes are not desired or not able to be accomplished, this vertical rod mount clamp becomes the perfect option. With adjustable clamp allowing to grip materials/counters from 3/4'' to 1-1/2'' and adjustable set screws on the bottom of the clamp to allow for extra gripping power and stability!

Set of 2, 3/8'' Diameter Vertical Rod Mount, Aluminum Clear Anodized Finish, 20'' Long w/ Adjustable Clamp to Accomodate 3/4'' to 1-1/2'' Counters. Hold up to 5/16'' material thickness

SKU: DCAD075-20A
Sku DCAD075-20A
Finish Clear Anodized
Material Aluminum
Material Grade 6063
Diameter 3/8''
Length 20''
Thickness Board Accepted 3/4'' to 1-1/2''
Thickness Material Accepted 5/16
Installation

Begin by removing everything from the packaging. Start with a rough layout to determine how far apart each bracket will need to be placed to accommodate your substrate that you would like to put between each rod. Grab the clamp and clamp it on the counter, tighten the 2 set screws found on the side, then find the set screws below and tighten to finalize the location of the clamp/rod. Repeat with your next clamp/rod, choose where to put each of the 2 panel grippers on the rod and slide your substrated into the grippers. Finish by ensure all set screws are snuggly tightened.

Tools Required 2 & 3mm Allen Wrench

Set of 2, 3/8'' Diameter Vertical Rod Mount, Aluminum Clear Anodized Finish, 20'' Long w/ Adjustable Clamp to Accomodate 3/4'' to 1-1/2'' Counters. Hold up to 5/16'' material thickness

SKU: DCAD075-20A

Set of 2, 3/8'' Diameter Vertical Rod Mount, Aluminum Clear Anodized Finish, 20'' Long w/ Adjustable Clamp to Accomodate 3/4'' to 1-1/2'' Counters. Hold up to 5/16'' material thickness

SKU: DCAD075-20A