Suspended Aluminum Floating, 3 Shelf, Glass Kit 12 x 12

Product 1

Suspended Aluminum Floating, 3 Shelf, Glass Kit 12 x 12

SKU: FGA12-12
Unit Price$171.16
Quantity Price Each (USD)
1-99 $171.16
100-501 $162.60
500+ $154.04
1000+ Contact Us
 

Suspended Aluminum Floating, 3 Shelf, Glass Kit 12 x 12

SKU: FGA12-12
Suspended Aluminum Floating, 3 Shelf, Glass Kit 12 x 12
Description:
This is our complete Aluminum 12" x 12" Floating Glass Shelf Kit. It contains all the pieces you need to create your own Floating Glass Shelves. This kit contains: 3 - 12" x 12" tempered glass panels 4 - Ceiling to floor cables 12 - Horizontal, Single Sided Clamps If you are unsure if this kit will work for you please give us a call at (813) 938-6025 NOTE: This kit does NOT contain the mounting hardware as that is depended on you installation. This is the floating shelf kit only. You can purchase the mounting hardware from us as well depending upon if you are installing this into wood/drywall or concrete. It is very important that for the most secure installation these cables are NOT mounted into just drywall with anchors. There should be actual support for these cables as they support the weight of the items as well as the system itself. If necessary spanners must be inserted between ceiling joists to secure the unit properly. NOTE: Each kit requires 8 anchor kits to be mounted. Please see below in "Related Products" for your application.

Suspended Aluminum Floating, 3 Shelf, Glass Kit 12 x 12

SKU: FGA12-12
Sku FGA12-12
Finish Satin Brushed
Inside/Outside Inside Use Only
Material Aluminum
Diameter N/A
Length 118'' (3 m)
Application Ceiling to Floor
Screw Size for Installation #8
Installation

The installation process is very easy!
First, mark where you will be hanging your wall, ceiling, or floor mounts.
Then, drill any necessary holes and install your anchors.

The cable will be threaded into both the Cable Tensioner and the Ceiling mount and then tightened down.

Install the bottom components first, then slide your Cable Supports onto your cable before installing your upper components.

When you go to install your upper components, determine if you have any excess cable and carefully cut away the excess.
If you are installing a Wall Mounted System, you will install the Vertical Assembly Arm(s) and then attach the Cable Tensioner and/or Ceiling Mount into the Vertical Assembly arm.
All that's left is to hang your material, tighten the set screws, and enjoy your beautiful display!

Anchor for Concrete ANC2
Anchor for Dry Wall ANC6, ANC6Z
Installation Hardware #8 Screw & Anchor
Tools Required M4 Hex Key, M5 Hex Key, Screwdriver

Suspended Aluminum Floating, 3 Shelf, Glass Kit 12 x 12

SKU: FGA12-12