Set of 2, 3/8'' Diameter Rod Projecting Sign, Stainless Steel Satin Brushed Finish, 25 13/16”. Material thickness up to 5/16”

Product 1

Set of 2, 3/8'' Diameter Rod Projecting Sign, Stainless Steel Satin Brushed Finish, 25 13/16”. Material thickness up to 5/16”

SKU: RPS24SS
Unit Price$61.12
Quantity Price Each (USD)
1-99 $61.12
100-501 $58.06
500+ $55.01
1000+ Contact Us
 
Select Finish:

Satin Brushed

Set of 2, 3/8'' Diameter Rod Projecting Sign, Stainless Steel Satin Brushed Finish, 25 13/16”. Material thickness up to 5/16”

SKU: RPS24SS
Set of 2, 3/8'' Diameter Rod Projecting Sign, Stainless Steel Satin Brushed Finish, 25 13/16”. Material thickness up to 5/16”
Description:
The Rod Projection Sign is sold in a set of two (2). The set of two (2) includes 2 rod mounts, 3/8” diameter rods that are 24 3/8” long, 4 material grips that hold up to 5/16” material,and Allen key. MBS has 2 optional additions available for the Rod Projecting Sign. - Ball end for the rod that gives it a finished - Mounting plate with 3 holes for added stability. The set does not include acrylic.

Set of 2, 3/8'' Diameter Rod Projecting Sign, Stainless Steel Satin Brushed Finish, 25 13/16”. Material thickness up to 5/16”

SKU: RPS24SS
Sku RPS24SS
Finish Satin Brushed
Inside/Outside Inside Use Only
Material Stainless Steel
Diameter 3/8''
Distance From Wall 25-13/16''
Length 25-13/16''
Thickness Material Accepted Between (1/8'' and 5/16'')
Maximum Thick. Material 5/16''
Screw Size for Installation #8
Installation

Installation is very easy!
First, mark where you will mount your standoffs, then drill any holes necessary and insert your anchors.
Before attaching your glass, we will mount the display to the wall.
Loosen the Set Screw from the Wall Mount points and removing the mural supports.
Next, slide a screw through the mural supports and tighten them securely into your anchor.
Slide the Wall Mount points onto the mural supports and tighten the set screws down.
Loosen the set screws on the glass connectors, place each half on either side of your material and tighten the set screw down.
Finally, loosen the set screws on the top hanging supports, place a washer on either side of the glass, insert your material between the supports, and tighten the set screws back down.
When all points are tightened down, take a step back and admire your beautiful display!

Anchor for Concrete ANC2
Anchor for Dry Wall ANC6, ANC6Z
Installation Hardware (2) #8 Screws & Anchors
Tools Required M3 Hex key, M4 Hex Key -> Include | Phillips Screwdriver -> No Include

Set of 2, 3/8'' Diameter Rod Projecting Sign, Stainless Steel Satin Brushed Finish, 25 13/16”. Material thickness up to 5/16”

SKU: RPS24SS

Set of 2, 3/8'' Diameter Rod Projecting Sign, Stainless Steel Satin Brushed Finish, 25 13/16”. Material thickness up to 5/16”

SKU: RPS24SS