Wall Mounted side support, Standoff: 3/8'' (10 mm)

Wall Mounted side support, Standoff: 3/8'' (10 mm)

Wall Mounted side support, Standoff: 3/8'' (10 mm)

SKU: 100.206
Unit Price$6.38
Quantity Price Each (USD)
1-99 $6.38
100-501 $6.06
500+ $5.74
1000+ Contact Us
 

Wall Mounted side support, Standoff: 3/8'' (10 mm)

SKU: 100.206
Wall Mounted side support, Standoff: 3/8'' (10 mm)
Description:
Our projecting and gripper systems are a fantastic way to set your company apart. The elegant finishes that we carry will give your display a unique look that will make it stand out like no other! Our projecting system requires a small hole to be drilled through the material to ensure the most secure fit. If you look below you will notice technical descriptions about this particular projecting standoff.

Wall Mounted side support, Standoff: 3/8'' (10 mm)

SKU: 100.206
Sku 100.206
Finish Satin Brushed
Inside/Outside Inside Use Only
Material Stainless Steel
Diameter 3/4''
Distance From Wall 3/8''
Length 1-3/4''
Washer Included
Thickness Material Accepted Between (3/8'' and 3/8'')
Maximum Thick. Material 3/8''
Installation

Installation is very easy!
First, mark where you will mount your standoffs, then drill any holes necessary and insert your anchors.
Next, loosen the Set Screw from the Projecting Wall mount and screw the Projecting Wall Mount securely into your anchor.
When your Projecting Wall Mounts are attached to the wall, place your material in the Projecting Wall Mount and tighten down the set screw.
When all points are tightened down, take a step back and admire your beautiful display!

Anchor for Concrete ANC2
Anchor for Dry Wall ANC6, ANC6Z
Installation Hardware #6 Screw & Anchor
Tools Required Screw Driver, Hand drill, M4 Hex Key

Wall Mounted side support, Standoff: 3/8'' (10 mm)

SKU: 100.206