Wire Suspension Kit for Signage – Includes 10' x 1/16'' Zinc Wire Cable, Drop Ceilling Mounts, and Grippers for 1/4'' Material, Aluminum Clear Anodized Finish
Wire Suspension Kit for Signage – Includes 10' x 1/16'' Zinc Wire Cable, Drop Ceilling Mounts, and Grippers for 1/4'' Material, Aluminum Clear Anodized Finish
SKU: TCLAMP1-250A
Wire Suspension Kit for Signage – Includes 10' x 1/16'' Zinc Wire Cable, Drop Ceilling Mounts, and Grippers for 1/4'' Material, Aluminum Clear Anodized Finish
SKU: TCLAMP1-250A| Sku | TCLAMP1-250A |
| Finish | Clear Anodized |
| Inside/Outside | Inside Use Only |
| Material | Steel Aluminum |
| Diameter | 5/8'' |
| Cable Diameter | 1/16'' |
| Rated Strength | 55 lbs (25 Kg) per Steel Cable (When Properly Installed) |
| Application | Ceiling Suspended |
| Thickness Material Accepted | Between (1/4'' and 1/4'') |
| Thread | 10-24 |
| Maximum Thick. Material | 1/4'' |
| Cross Reference | WSK-6 |
| Installation |
Insert and slide the two parts of the TCLAMP1 onto the T-bar drop ceiling. Unscrew the set screw from the fork, slide the cable inside, and tighten the set screw to secure the cable in place on the TCLAMP1. Cut the cable to the desired length. Unscrew the set screw from the other fork, slide your material into place, and tighten the set screw to secure it. Voilà! Your setup is complete! |
| Tools Required | Cable Cutter, Allen Key 3/32'' |
Wire Suspension Kit for Signage – Includes 10' x 1/16'' Zinc Wire Cable, Drop Ceilling Mounts, and Grippers for 1/4'' Material, Aluminum Clear Anodized Finish
SKU: TCLAMP1-250A
Stainless Steel Cable Cutter, Signage, Aircraft, Bicycle Cable or Wire Rope, Up to 5/32"
SKU: CABLECUTTER
