1/2'' x 1/2'' Stainless Steel Square Standoff Satin Brushed Finish (for Indoor Use) [Required Material Hole Size: 3/8'']

1/2'' x 1/2'' Stainless Steel Square Standoff Satin Brushed Finish (for Indoor Use) [Required Material Hole Size: 3/8'']

SKU: CPFI14.14

Unit Price$3.78

Quantity	Price Each (USD)
1-99	$3.78
100-501	$3.59
500+	$3.40
1000+	Contact Us

Click Here To View Similar Products In Our Catalog

Select Diameter:

1/2''

7/8''

1-3/16''

Select Distance From Wall:

1/2''

Select Inside/Outside:

Inside Use Only

1/2'' x 1/2'' Stainless Steel Square Standoff Satin Brushed Finish (for Indoor Use) [Required Material Hole Size: 3/8'']

SKU: CPFI14.14

Description:

Our Stainless Steel Square Standoffs are perfect for all your indoor applications. The elegant finishes that we carry will give your display a unique look that will make it stand out like no other! Thanks to the easy installation process you can have an exhibit displayed anywhere you would like in no time! If you look below you will notice technical descriptions about this particular standoff. You can additionally check out all of our informational videos and how to's on YouTube utilizing the link in the table below!

1/2'' x 1/2'' Stainless Steel Square Standoff Satin Brushed Finish (for Indoor Use) [Required Material Hole Size: 3/8'']

SKU: CPFI14.14

Sku	CPFI14.14
Finish	Satin Brushed
Inside/Outside	Inside Use Only
Material	Stainless Steel
Material Grade	201
Diameter	1/2''
Distance From Wall	1/2''
Cap Height	1/16''
Solid/Hollow	Solid
Head Shape	Flat
Length	1/2''
Shape	Square
Washer	Included Silicone Washers

Thickness Material Accepted	Between (1/8'' and 3/16'')
Required Material Hole Size	3/8''
Maximum Thick. Material	3/16''

Screw Size for Installation	#6
Installation	The installation process is very easy! First utilize your surface to mark the holes. Next you will want to drill a hole and insert your anchors. Loosen the set screw on your standoff, remove the cap, insert a screw inside the barrel and screw it into the anchor. Now all you need to do is line up your material with the standoffs, insert the head of the standoff and tighten the set screw, and VOILA!, you have beautiful standoffs on your wall!
Anchor for Concrete	ANC1
Anchor for Dry Wall	ANC5, ANC5Z
Load Capacity Per Standoff	15 lbs / 7 Kg

Installation Hardware	#6 Screw & Anchor
Tools Required	Screw Driver, Hand Drill, 2MM Hex Key for M4 set Screw

1/2'' x 1/2'' Stainless Steel Square Standoff Satin Brushed Finish (for Indoor Use) [Required Material Hole Size: 3/8'']

SKU: CPFI14.14

1/2'' x 1/2'' Stainless Steel Square Standoff Satin Brushed Finish (for Indoor Use) [Required Material Hole Size: 3/8'']

SKU: CPFI14.14

1/2'' x 1/2'' Stainless Steel Square Standoff Satin Brushed Finish (for Indoor Use) [Required Material Hole Size: 3/8'']

SKU: CPFI14.14