Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 3/4'' to 1-1/2'' Counters. M6 Thread on the top

Product 1

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 3/4'' to 1-1/2'' Counters. M6 Thread on the top

SKU: DCAD075A
Unit Price$18.90
Quantity Price Each (USD)
1-99 $18.90
100-501 $17.96
500+ $17.01
1000+ Contact Us
 
Select Finish:

Clear Anodized

Black Anodized

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 3/4'' to 1-1/2'' Counters. M6 Thread on the top

SKU: DCAD075A
Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 3/4'' to 1-1/2'' Counters. M6 Thread on the top
Description:
Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 3/4'' to 1-1/2'' Counters. M6 Thread on the top. With 1 set screw on back to secure clamp and one on the bottom for extra security to the desk

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 3/4'' to 1-1/2'' Counters. M6 Thread on the top

SKU: DCAD075A
Sku DCAD075A
Finish Clear Anodized
Material Aluminum
Material Grade 6063
Diameter 3/8''
Length 20''
Thickness Board Accepted 3/4'' to 1-1/2''
Thickness Material Accepted 5/16
Installation

Begin by removing everything from the packaging. Start with a rough layout to determine how far apart each bracket will need to be placed to accommodate your substrate that you would like to put between each rod. Grab the clamp and clamp it on the counter, tighten the 2 set screws found on the side, then find the set screws below and tighten to finalize the location of the clamp/rod. Repeat with your next clamp/rod, choose where to put each of the 2 panel grippers on the rod and slide your substrated into the grippers. Finish by ensure all set screws are snuggly tightened.
Tools Required 2 & 3mm Allen Wrench

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 3/4'' to 1-1/2'' Counters. M6 Thread on the top

SKU: DCAD075A

Set of 2, Adjustable Clamp, Aluminum Clear Anodized Finish, to Accommodate 3/4'' to 1-1/2'' Counters. M6 Thread on the top

SKU: DCAD075A