Find the location where the TCLAMP will be attached to the drop ceiling.

Put one half on each side of the drop ceiling rail and slide the two halves together.

Take the looped end of your cable and put it over the TCLAMP hook.

Take your cable and cut the cable to the desired length.

Allow extra to be screwed into the hanging forks.

Take your cut cable and feed it through the hole on  the end of  the fork and tighten the set screw  to hold the cable in place.

With the fork(s) attached to the cable you can attach your panel to the forks.

Unscrew the set screw, position your panel in place and secure the set  screw.

Note: The stainless steel forks will have washers to protect your panel.